+45 53161601

ODENSE, DENMARK

©2019 by PCB Grinder

Gravity's Rainbow - Components Kit

€250.00Price

Gravity's Rainbow was inspired by the preamps in my old Chilton QM3 console, which I started doing version of back in 20013, arriving at this verison in 2019.

It features a special trafo, configuration switching circuit, so you can load and stack the trafo in 4 different ways, the "correct" one with none of the trafo flips engaged. 

To make it a perfect recording channel, I added a bax filter for tone shaping, and if you are into old skool discrete opamps, you can add one for the bax circuit as well as in the preamp. 

Input transformer is a Lundahl LL1528, but you can experiment with alternatives. 

What you will need with the partial kit
Front and back panels + a case
IEC and power switch
Power transformers (2 x 15V seondaries, 1 x 48V secondaries)
Wires, nuts and bolts

VU meter
XLRs
Knobs

Audio Transformer (available as option)

Discrete opamps (M100D from Silent Arts/51x audio available as option)

IC/DOA
  • Processing

    2-4 weeks on kits

 
MSPQ.jpg

PCBs

MS4KloresII.jpg

Components Kits

GssL.jpg

Full Kits